Enfield Enforcer: A target rifle for Police sniper use

Enfield Enforcer Police Sniper Rifle
Enfield Enforcer Police Sniper Rifle (Photo: XY)

Enfield Enforcer was a police sniper rifle chambered in 7.62mm caliber specifically designed for police use. In the early 1970s, the Enfield Enforcer was developed from the military L39A1 target rifle specifically for Police sniper use.


In the years following World War Two, the semi-automatic assault rifle emerged as the rifle action of the future. As such, most all development of military bolt action rifles stopped, of course, including the Lee-Enfield. However, popular and traditional thinking persisted on the theory that only bolt actioned rifles could provide the accuracy needed for snipers and marksmen (a thought that remains today).

In addition to this, the military was concerned that the new assault rifles would degrade the individual soldier’s marksmanship principles; in other words, “aimed shots” would be replaced by the “spray and pray” mentality. Another concern early on was for the civilian shooter involved in military marksmanship competitions. What civilian could afford or what government would allow the average person to tote around a privately owned assault rifle?

So on a far smaller scale, development continued with the tried and true Lee-Enfield over the years. This development produced several militaries and civilian target/sniper-type rifles. Namely, on the military side, the L39A and the L42A1, on the civilian side was the Envoy and Excel, and on a Police sideline, the Enfield Enforcer.

The departure from the infantry “line” rifle to that of the specialty rifle allowed the developers to design outside of the box. Only one restriction was placed on them; the rifle must be chambered for the “new” 7.62mm NATO round. The results were; a shortened fore-end (all but the Excel had a top handguard), a free-floated heavy barrel, a modified action to accommodate the 7.62mm round, and the corresponding magazine. Most sported Monte Carlo butts; front tube sights, and rear Parker-Hale competition rear sights.


A bolt action, a single shot rifle chambered for the 7.62 x 51 mm cartridge. The ‘Lee’ bolt is fitted to a cold-forged barrel with ‘Enfield’ rifling of six grooves chordal rifling. The original barrels had standard four groove rifling, and the chordal rifling was introduced to reduce bullet drag and thus give improved long-range ballistics. In practice, it is frequently found that chordal rifling affects short-range accuracy unless the barrel is warm: cold the first two shots go high right and then the remainder of the rounds return to the ‘zero’ pattern.

Enfield Enforcer rifle with scope mounted
Enfield Enforcer rifle with a scope mounted (Photo: XY)

The magazine is spring-fed, has a 10 round capacity, and is loaded singly. A Charger Guide is fitted, but with a ‘scope’ provided, it cannot be used.

To spotlight the Enfield Enforcer specifically:

Approximately 700 of these rifles were produced in total, not many considering today’s world; a commercial “commemorative” type rifle is usually produced in 1000 rifle numbers. The Enforcer chambered in 7.62mm NATO came standard with:

1) A “Matchmaker” front tube sight,
2) Parker-Hale adjustable twin zero rear competition sight,
3) Free-floated heavy barrel,
4) Shortened (sporter style) fore-end with handguard and Monte Carlo butt,
5) A PICAR 4-10X45 scope mounted on Parker-Hale pads and
6) Upon request of the individual sniper, it could be fitted with a Bi-pod.

All Enfield Enforcer’s were built using new Mk2 actions (trigger hung from the receiver versus turned from the trigger guard), and all were stocked with new beechwood furniture. In keeping with traditional practice, these rifles were issued to individual Police marksmen.

Given today’s liberal thinking, many of these rifles have not survived, being crushed by their former owners, the Police. The attitude of governments today precludes them from surplus firearms for public sale. It is indeed a sad commentary on history that as early as 40 years ago, marksmanship and competitive shooting were a family endeavor.

Sponsored and encouraged by governments. Today it is perceived as a black art, outlawed by some countries and greatly discouraged by others. So if one finds an Enforcer for sale, it should be considered a rare find and promptly bought up. Interesting that the last made Enfields would be the hardest to find.

As a ‘snippet’ of historical interest – In the 1960’s India ordered 60,000 7.62 caliber Rifles from the U.K. Production of the parts commenced, but this was also the time of the India, Pakistan crisis. India wanted to buy Sterling Sub-Machine guns at the same time – when this was refused – India canceled the order for the 60,000 rifles. This is the reason that nearly every 7.62 Magazine you will see is stamped with the 1965 manufacturing date.

Technical specifications

Manufacturer: Charnwood Ordnance, United Kingdom
Designed: 1970s
Service: 1970s-1990s
Type: bolt-action repeater
Caliber:  7.62x51mm
Barrel: 699 mm (27.5 in)
Weight (empty): 4.75 kg excluding telescopic sight (10 1/ 2 lb)
Effective firing range: 915 meters (1000 yards)
Rate of fire: single
Magazine capacity: 10-rounds detachable magazine box
iron sights; can be mounted with any scope


  1. correction magazine is 10 rds, effective range is 1000 yards triger was modified to be a perfect 4lbs and my one shoots 0.700 groups with std military ammo

  2. Brought mine with my compensation that I got for handing in my pistols back in 1997 paid the grand-some of £600 since then I’ve managed to source an original scope and some extra magazines . And often shoot it at Bisley .

  3. ‘all were stocked with new beechwood furniture’. Not quite accurate: while the forend and handguard were beechwood, the buttstocks were made from black walnut.

  4. Hi I have just acquired a Enfield police enforcer No 112 I believe it was issued to the Staffordshire police force.
    Has anyone got any information on this rifle?.
    Many Thanks

  5. The Enforcer 7.62mm Sniper Rifles were made by Royal Small Arms Factory, Enfield (RSAF), NOT by Charnwood Ordnance, which was a private firearms dealer with a large stock of Lee-Enfield parts. Charnwood is reported to have assembled some (several hundred at least) No. 4 type rifles using spare parts in 7.62 mm calibre. It is possible that Charnwood might have assembled some clones of the Enforcer using parts.

    Ian Skennerton wrote that “some 500 Enforcers were set up for police use”. The author of this article states “approximately 700”. “Riflechair” on YouTube believes that about 767 we made as i recall. How may might have been destroyed by governmentand authorities is not known.

    I suggest that you search on YouTube for two 2015 videos on the Enforcer Sniper Rifle entitled “Introduction to the ENFIELD ENFORCER” and “ENFIELD ENFORCER – 1st SHOTS”. Note that the creator of the videos, “Riflechair”, using modern definitions of “sniper” vs. “dedicated marksman”, is emphatic that it is not a sniper rifle, but the Royal Small Arms Factory Enfield clearly labels it in their printed advertising as “ENFORCER 7.62mm SNIPER RIFLE.” The RSAF literature is shown in the first video. In the 1970s, it was indeed a “sniper” rifle.

    For information on Enforcer, Envoy, L39A1 and L42A1 rifles one can search and ask on milsurps.com > The Lee Enfield Knowledge Library Collectors Forum > where the top “sticky” is “Service for M42A1, Enforcer, Envoy and L39A1 Owners”. The main responder has a copy of many of the original records. For an Enforcer they can tell you which police force it was issued to. For an L42A1 they can tell you when it was delivered to the British Army. milsurps.com/showthread.php?t=6159

  6. As a Canadian, I am quite familiar with the Enfield conversions to 7.62 NATO. As a former DCRA target shooter, I have seen these rifles do exceptionally well at 1000 yds, with the mandated Canadian issue IVI ammunition … which varied considerably for powder weights. With this ammo, the rear bolt lugs on the Enfield minimized vertical.stringing. SOME of these Enfield’s shot better in DCRA 1000 yd than did much more expensive rifles with more solid front bolt lock up.

  7. Nigel regarding enforcer 112
    112 was issued to West Midlands Police 12th Feb 1974

    There were 2 enforcers issued to Staffs police, the one I own No.476 and another, which after a freedom of information request to them they confirmed they still retain for tactical training although it has been retrofitted with an L42 butt stock. Unfortunately as it is still a police firearm we all know it’s fate! Hope this helps.


Please enter your comment!
Please enter your name here